PROSTRENGTH® Rapid Set Concrete Mix
PROSTRENGTH® Rapid Set Concrete Mix
Made right here in Australia, Cement Australia's PROSTRENGTH® Rapid Set Concrete is designed to harden rapidly and deliver 40MPa* - twice the strength of a standard rapid set mix . Ideal for those more demanding jobs where higher strength is specified. Suitable for professional fencing, gates, commercial signs, retaining walls, sporting equipment installations and general building site and home projects.
* Note: This PROSTRENGTH® Rapid Set Concrete Mix compressive strength & Early Strength Development data was achieved under controlled laboratory conditions, at 23 degrees Centigrade. They should be used only as a guide to potential strength as various factors can impact final strength results.
TMR Approved product - Bagged Concrete (for frangible support posts). Registered product: MRTS14
Product index for bridges and other structures
Safety Data Sheet
Landscaping
Uprights
Posts
- Made Right Here in Australia
- Twice the strength of standard Rapid Set Concrete Mix
- No mixing required - Just add water
- Formulated for those demanding jobs were strength and speed is required
- Concrete is not recommended for use with aluminium posts or poles unless these are primed or sealed according to the post manufacturers’ recommendation.
- Extreme temperatures will impact set time of PROStrength® Rapid Set Concrete. Not recommended for use below 10°C and above 35°C
- Do not add additional cement, sand, other aggregates or admixtures to the mix.
- The use of concrete mixers or tools to mix the material should be avoided as this product hardens quickly.
- Excess water will reduce the ultimate strength performance of this product.
- It is important that you are prepared to complete the project quickly as this product has fast setting properties.
- When using for posts, pre wet the hole if dry.
- Hot temperatures will impact set times, avoid working in direct sunlight.
- Clean all tools and equipment with water without delay after use
